Rear Door Module Repair Procedures

Replacement

1. 1
   Remove the rear door glass. (Refer to Rear Door - "Rear Door Glass")
2. 2
   Remove the rear door outside handle. (Refer to Rear Door - "Rear Door Outside Handle")
3. 3
   Loosen the rear door outside handle base mounting bolt (A).

   

4. 4
   After loosening the mounting bolts and nuts, remove the rear door outside handle by pulling up the rear door channel (A). Tightening torque: Bolt: 6.9 ~ 10.8 N·m Nut: 3.9 ~ 5.9 N·m

   

   

5. 5
   Loosen the rear door latch mounting screws (A).
6. 6
   After loosening the mounting bolts, remove the rear door module (B). Tightening torque: Bolt: 7.8 ~ 11.8 N·m Screw: 6.9 ~ 10.8 N·m

   

7. 7
   Disconnect the connectors (A) and the front door module wiring harness.

   

8. 8
   Remove the rear door lock assembly. (Refer to Front Door - "Rear Door Latch")
9. 9
   Remove the rear speaker. (Refer to Body Electrical System - "Speakers")
10. 10
    Remove the rear power window motor. (Refer to Body Electrical System - "Power Window Motor")
11. 11
    Install in the reverse order of removal.

    Check that the connectors are connected correctly and that each rod is securely connected. Check that the door locks/unlocks and opens/closes properly.