Hyundai Genesis DH Quiz
Body (Interior and Exterior)

Rear Door Outside Handle Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
4steps
~24min
2/5difficulty
0102030405010.88N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Replacement

  1. Remove the hole plug (B).
  2. After loosening the mounting bolt, remove the rear door outside handle cover (A).

    Tightening torque: 6.9 ~ 10.8 N·m

  3. Remove the rear door outside handle (A) by pressing it in the direction of the arrow.
  4. Install in the reverse order of removal.
    • Be sure to install the outside handle garnish (A), then install the outside handle.
    • Make sure the connector is properly connected.
    • Check that the door locks/unlocks and opens/closes properly.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.