Storing Memory Positions

1. Make sure the shift lever is in the P (Park) position while the Engine Start/Stop button is in the ON position.

2. Adjust the driver's seat position, outside rearview mirror position, steering wheel position, instrument panel illumination brightness, and head-up display height/brightness to positions comfortable for the driver.

3. Press the SET button. The system will beep once and display "Press the button to save settings" on the LCD display.

4. Press one of the memory buttons (1 or 2) within 5 seconds. The system will beep twice when the memory has been successfully stored.

5.

"Driver 1 (or 2) Settings Saved" appears on the LCD display.

Recalling Memory Positions

1. Make sure the shift lever is in the P (Park) position while the Engine Start/Stop button is in the ON position.

2. Press the desired memory button (1 or 2). The system will beep once, and then the driver's seat position, outside rearview mirror position, steering wheel position, instrument panel illumination brightness, and head-up display height/brightness will automatically adjust to the stored positions.

3.

"Driver 1 (or 2) Settings Applied" appears on the LCD display.

✽ NOTICE

• When recalling memory position "1", pressing the SET button or the 1 button temporarily stops adjustment of the recalled memory position. Pressing the 2 button recalls memory position "2".
• When recalling memory position "2", pressing the SET button or the 2 button temporarily stops adjustment of the recalled memory position. Pressing the 1 button recalls memory position "1".
• When recalling stored positions, pressing any of the control buttons for the driver's seat, outside mirror, steering wheel, instrument panel illumination, or head-up display will stop the movement of that component and move it in the direction the control button is pressed.