Brake Pedal Repair Procedures

DEPOSIT

1. 1
   Turn the ignition switch to the OFF position.
2. 2
   Remove the lower panel of the airbag. (Refer to Body group - Airbag)
3. 3
   Disconnect the brake light switch connector (A).

   

4. 4
   Remove the bolts of the mounting bracket.

   Tightening torque: 16.7 ~ 26 N·m N·m

   

5. 5
   Remove the safety clip and cotter pin.

   

6. 6
   Remove the brake pedal mounting nuts (A), then remove the brake pedal.

   Tightening torque: 16.7 ~ 26 N·m N·m

   

7. 7
   Disassemble the brake pedal assembly.
8. 8
   Pull the lock plate (A) as shown by the arrow.

   

9. 9
   Turn the brake light switch 45° counterclockwise and discard it.

   

Inspection

1. 1
   Check the bushing for wear.
2. 2
   Make sure the brake pedal is not bent or deformed.
3. 3
   Make sure the brake pedal return spring is not damaged.

REMEDY

1. 1
   To install, perform the removal procedure in reverse order.
2. 2
   Check the brake pedal operation.