Hyundai Kona Quiz
Engine Control System/Fuel System

Seat Belt Switch Repair Procedures

In this manual: Engine Control System/Fuel System
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
4steps
~24min
2/5difficulty
Done 0 of 4

Inspection

  1. Disconnect the connector from the switch.
  2. Check the circuit between the terminals for continuity.
    Seat Belt Status Continuity
    Fastened Non-continuity (∞ Ω)
    Unfastened Continuity (Ω)

Removal

  1. Remove the front seat.
  2. Loosen the mounting bolt and remove the front seat belt buckle (A).

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.