Engine Compartment Fuse Panel Replacement

■ Blade Fuse

■ Cartridge Fuse

1. Turn off the engine.

2. Turn off all other switches.

3. Remove the fuse panel cover by pressing the tab and pulling up.

4. Check the removed fuse. Replace it if it is blown. To remove or install a fuse, use the fuse puller in the engine compartment fuse box.

5. Insert a new fuse of the same type and rating, and make sure it fits firmly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer.

CAUTION

After checking the fuse box, securely close the fuse box cover inside the engine compartment until it clicks.

If the fuse box cover is not closed properly, water may leak inside, possibly causing an electrical system malfunction.

Multi Fuse

If the multi-purpose fuse is blown, it must be removed as follows:

1. Turn off the engine.

2. Disconnect the negative battery cable.

3. Remove the fuse panel cover by pressing the tab and pulling it up.

4. Remove the nuts shown in the illustration above.

5. Replace the fuse with a new one of the same rating.

6. Reinstall in the reverse order of removal.

Information

If the multi-purpose fuse is blown, contact an authorized HYUNDAI dealer.