Rear Combination Light Replacement

■ Type A (Standard)

■ Type B (LED)

■ Type A

(1) Tail light
(2) Brake/stop light
(3) Turn signal light
(4) Side marker light
(5) Back-up light

■ Type B

(1) Tail light, Side marker light
(2) Stop light
(3) Turn signal light
(4) Side marker light
(5) Back-up light
(6) Garnish light

Stop Light / Tail Light and Turn Signal Light (Type B)

1. Turn off the engine.

2. Open the tailgate.

3. Loosen the lamp assembly mounting screws with a Phillips screwdriver.

4. Remove the rear combination light assembly from the vehicle body.

5. Remove the socket from the assembly by turning it counterclockwise until the tabs on the socket align with the slots in the assembly.

6. Remove the bulb from the socket by pushing it in and turning it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.

7. Install the new bulb by inserting it into the socket and turning it until it locks in place.

8. Install the socket into the assembly by aligning the tabs on the socket with the slots in the assembly. Insert the socket into the assembly and turn it clockwise.

9. Install the lamp assembly in the vehicle body.

Side Light (Type A, B), Tail/Stop Light, Turn Signal Light (Type B), Garnish Light

If the LED light does not work, have the system checked by an authorized HYUNDAI dealer.

LED lights cannot be replaced individually because they are an integrated unit. The LED lights must be replaced as a unit.

A qualified technician should inspect or repair the LED light, as improper handling may damage related vehicle parts.

Back-up Lamp

If the bulb does not work, have the vehicle inspected by an authorized HYUNDAI dealer.