Kia Cadenza VG Owner's Manual Quiz
Body Electrical System

Door Lamp Repair Procedures

In this manual: Body Electrical System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
14steps
~84min
3/5difficulty
Done 0 of 14

Removal

Ambient Lamp

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim panel. (Refer to Body - "Front Door")
  3. Disconnect the connector and remove the mood lamp LED (A).
  4. Remove the rear door trim panel. (Refer to Body - "Rear Door")
  5. Disconnect the connector and remove the mood lamp LED (A).

Door Lamp

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim panel. (Refer to Body - "Front Door")
  3. Turn the socket counterclockwise to remove the door lamp bulb (A).

Installation

Ambient Lamp

  1. Install the door mood lamp after connecting the connector.
  2. Install the door trim panel.
  3. Connect the negative (-) battery terminal.

Door Lamp

  1. Install the door lamp after connecting the connector.
  2. Install the door trim panel.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.