Body Electrical System

Hazard Warning Switch Repair Procedures

6steps
~36min
2/5difficulty
Done 0 of 6

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the center fascia panel (A) with the hazard warning switch.
  3. Disconnect the vacuum hose (A) and the hazard warning switch connector (B).
  4. Remove the hazard warning switch assembly (A) after removing the screws.

Installation

  1. Install the hazard switch.
  2. Install the center fascia panel.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.