Kia Cadenza VG Owner's Manual Quiz
Body Electrical System

Front Fog Lamp Repair Procedures

In this manual: Body Electrical System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
11steps
~66min
3/5difficulty
Done 0 of 11

Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the lighting switch from the multifunction switch. (Refer to Multifunction Switch)
  3. Using the front fog lamp switch, check for continuity between the terminals shown below. If continuity is not as specified, replace the multifunction switch.
    Front Fog Lamp

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front wheel arch. (Refer to Body - Front Bumper)
  3. Disconnect the front fog lamp connector (A) and remove the cover (B).
  4. Replace the front fog lamp bulb (C) by turning it counterclockwise.
  5. Remove the front fog lamp (A) by removing the screws.

Installation

  1. Install the front fog lamp.
  2. Connect the lamp connector.
  3. Install the front wheel arch.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.