Kia Cadenza VG Owner's Manual Quiz
Body Electrical System

Room Lamp Repair Procedures

In this manual: Body Electrical System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
12steps
~72min
3/5difficulty
Done 0 of 12

Inspection

Map lamp
  1. Make sure the switch operates properly after disconnecting the interior lamp connector (A).

Removal

Map lamp
  1. Disconnect the negative (-) battery terminal.
  2. Carefully remove the lens (A) using a small screwdriver.
    Be careful not to damage the part (B).
  3. Remove the bulb (A) and the room lamp after loosening the mounting screws.
  4. Remove the room lamp assembly (A) from the headliner, disconnecting the connector (B).
  5. Disconnect the negative (-) battery terminal.
  6. Remove the vanity lamp (A) by pressing the clip (B) with a flat-blade screwdriver.
  7. Replace the bulb.
Vanity lamp

Installation

Map lamp
  1. Connect the connector.
  2. Install the room lamp assembly.
  3. Install the lens.
  4. Reconnect the vanity lamp connector.
  5. Install the vanity lamp.
Vanity lamp

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.