Static Cornering Light

Perform steps 1 through 2 in the previous section.

3. Remove the headlight bulb cover by turning it counterclockwise.

4. Disconnect the headlight bulb socket connector.

5. Disconnect the headlamp bulb retaining wire by pressing the end and pushing it upward.

6. Remove the bulb from the headlamp assembly.

7. Install a new bulb and insert the headlight bulb retaining wire into position, aligning the wire with the groove on the bulb.

8. Connect the headlamp bulb socket connector.

9. Install the headlight bulb cover by turning it clockwise.

10. Connect the power connector to the rear of the headlamp assembly.