System Operation

Ventilation

1. Set the mode toposition.

2. Set the air intake control to the outside (fresh) air position.

3. Set the temperature control to the desired position.

4. Set the fan speed control to the desired speed.

Heating

1. Set the mode toposition.

2. Set the air intake control to the outside (fresh) air position.

3. Set the temperature control to the desired position.

4. Set the fan speed control to the desired speed.

5. If dehumidified heating is required, turn on the air conditioning system.

• If the windshield fogs up, set the mode toorposition.

• To prevent dust or unpleasant odors from entering the vehicle through the ventilation system, temporarily set the air intake control to recirculation. Be sure to return the control to the fresh air position when the irritant has passed to keep fresh air in the vehicle. This helps keep the driver alert and comfortable.
• Air for the heating/cooling system is drawn in through the grille only in front of the windshield. Make sure the grille is not blocked by leaves, snow, ice, or other obstructions.
• To prevent interior windshield fogging, set the air intake control to the fresh air position, set the fan speed as desired, turn on the air conditioning, and adjust the temperature control to the desired temperature.

Air Conditioning

Kia air conditioning systems are filled with environmentally friendly refrigerant*.

1. Start the engine. Press the A/C button.

2. Set the mode toposition.

3. Set the air intake control to the outside air or recirculation position.

4. Adjust the fan speed and temperature for maximum comfort.

CAUTION

• The refrigerant system must be serviced only by trained and certified technicians to ensure correct and safe operation.
• The refrigerant system should be serviced in a well-ventilated area.
• The air conditioning evaporator (cooling coil) is never to be repaired or replaced with one removed from a used or salvaged vehicle. New MAC evaporators must be certified (and marked) as conforming to SAE J2842.

✽ NOTICE

• When using the air conditioning system, watch the temperature gauge closely when driving uphill or in heavy traffic at high outside temperatures. Operating the air conditioning system may cause the engine to overheat. Continue to use the blower, but turn off the air conditioning system if the gauge indicates engine overheating.
• When opening the windows in humid weather, the air conditioning may cause water droplets to form inside the vehicle. Since excessive water droplets may cause damage to electrical equipment, the air conditioning should be used only with the windows closed.

• If the vehicle has been parked in direct sunlight in hot weather, open the windows briefly to release the hot air from the vehicle interior.
• Use the air conditioner to reduce humidity and dampness inside the vehicle on rainy or humid days.
• During air conditioning operation, you may occasionally notice a slight change in engine speed when the A/C compressor engages. This is a normal operating characteristic of the system.
• Operate the air conditioning system for only a few minutes each month to maintain maximum system performance.
• When using the air conditioning system, you may notice clear water dripping (or even puddles) on the ground under the passenger side of the vehicle. This is a normal operating characteristic of the system.
• Operating the air conditioning system in recirculation mode provides maximum cooling; however, continuous operation in this mode may cause the air inside the vehicle to become stale.
• During cooling operation, you may occasionally notice a misty airflow due to rapid cooling and intake of humid air. This is a normal characteristic of system operation.