Kia Forte BD Quiz
Body (Interior and Exterior)

Front Bumper Assembly

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 32Engine Mechanical System — 47Engine Electrical System — 17Emission Control System — 10Engine Control System/Fuel System — 32Clutch System — 11Manual Transmission — 11DCT (Dual Clutch Transmission) System — 16Drive Shaft and Axle — 8Suspension System — 26Steering — 9Restraints — 11Brake System — 27Body (Interior and Exterior) — 119Body Electrical System — 98Heating, Ventilation, and Air Conditioning — 27
6steps
~36min
3/5difficulty
Done 0 of 6

Components and Component Location

Component Location

1. Front Bumper Assembly

Repair Procedures

Replacement

  1. Remove the upper front bumper mounting bolts.

  2. Loosen the lower front bumper mounting clips.

  3. After loosening the pin clips and screws on the side, disconnect the side of the front bumper assembly.

  4. Disconnect the front bumper connector (A).

  5. Remove the front bumper assembly (A).

  6. To install, reverse the removal procedure.

Test yourself

A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.