High Beam Assist

High Beam Assist is a system that automatically controls the headlamp range (switching between high beam and low beam) according to the brightness of other vehicles and road conditions.

Operating Condition

1. Set the light switch to the AUTO position.

2. Turn on the high beams by pushing the lever away from you.

3. High Beam Assist () indicator will illuminate.

4. The high beam assist system will activate when vehicle speed is above 40 km/h.

5. Details on operating the light switch with High Beam Assist on are described below.

(1) If the light switch is pushed forward, the high beam assist system will be turned off and the high beam will be on.
(2) If the light switch is pulled toward you when high beam assist is off, the high beam will be on without canceling High Beam Assist. (When released, the lever returns to the center and the high beam turns off.)
(3) If the light switch is pulled toward you when high beam assist is on, the low beam will be on and the high beam assist system will be turned off.
(4) If the light switch is turned to the headlamp position ( ) from the AUTO position, High Beam Assist will be turned off and the low beam will be on.

Warning Light and Message

If the high beam assist system does not operate properly, a warning message will appear for several seconds. After the message disappears, the master warning light will illuminate. In this case, have the vehicle inspected by an authorized Kia dealer.

CAUTION

The high beam assist system may not operate properly in the following situations:

• When the light from another vehicle is weak
  - When the light from another vehicle is not detected due to a damaged lamp, being hidden from view, etc.
  - When the headlamps/tail lamps of another vehicle are not illuminated.
  - When the headlamps of another vehicle are off but the fog lamps are on, etc.
• When external conditions interfere
  - When there is a shape similar to vehicle lamps.
  - When the headlamps have not been repaired or replaced at an authorized dealer.
  - When the headlamp aim is not properly adjusted.
  - When driving on a narrow winding road, an uneven road, or downhill or uphill.
  - When only part of the vehicle ahead is visible at an intersection or on a curved road.
  - When there is a traffic light, reflective sign, flashing sign, or mirror ahead.
  - When there is a temporary reflector or flashing light ahead (construction area).
  - When road conditions are poor, such as when wet, icy, or snow-covered.
  - When a vehicle suddenly appears from around a curve.
  - When the vehicle is tilted due to a flat tire or towing.
• When forward visibility is poor
  - When the lamps of an oncoming vehicle or a vehicle ahead are covered with dust, snow, or water.
  - When the light of an oncoming or vehicle ahead is not detected due to exhaust smoke, fog, snow, etc.
  - When the windshield is covered with foreign matter.
  - When visibility is poor due to fog, heavy rain, or snow, etc.

✽ NOTICE

• Do not disassemble the front view camera, apply window tint, or install any coatings or accessories. If the camera is disassembled and reassembled, take your vehicle to an authorized Kia dealer and have the system checked to see if calibration is required.
• When replacing or reinstalling the windshield or front view camera, take your vehicle to an authorized Kia dealer and have the system inspected.
• Be careful not to let water get into the high beam control unit, and do not remove or damage parts of the high beam assist system.
• Do not place objects on the instrument panel that reflect light, such as mirrors, white paper, etc. The system may not operate properly if sunlight is reflected.
• The high beam control system may occasionally not operate properly due to system limitations. The system is for your convenience only. It is the driver's responsibility to drive safely and always check road conditions.
• When the system does not operate normally, change the lamp position manually between high beam and low beam.
• Do not place any accessories, stickers, or tint on the windshield.