Gear Shift Lever

Components and Component Location

Components

Repair Procedures

Removal

1. 1

   Remove the knob (A) by pulling it upward after removing the boots from the upper console cover.

   

2. 2

   Remove the floor console assembly.

   (Refer to Body - Floor Console Assembly)

3. 3

   Disconnect the select cable.

   1. Remove the stop pin (A).

      

   2. Disconnect the select cable (A) from the shift lever.

      

4. 4

   Remove the shift cable.

   1. Remove the lock pin (A) in the direction indicated by the arrow.

      

   2. Disconnect the shift cable (A) from the shift lever.

      

5. 5

   Remove the shift lever assembly (A) after loosening the mounting bolts.

   Tightening torque: 8.8–13.7 N·m

   

Installation

1. Install in the reverse order of removal.

Inspection

1. 1

   Check that the control shaft lever operates correctly when pressed (1st, 2nd, 3rd, 4th, 5th, 6th, reverse).

2. 2

   When the shift lever is in the "R" position, check that the skirt is in the correct position.

3. 3

   If the gear feels tight, readjust the length of the control cable.

   (Refer to Control Cable - Installation)