Steering Wheel
Components and Component Location
Components

| 1. Bezel 2. Remote Control Switch 3. Steering Wheel |
4. Dynamic Damper 5. Extension Wiring 6. Lower Cover |
Repair Procedures
Removal and Installation
Disconnect the negative battery cable.
Turn the steering wheel so the front wheels face straight ahead.
Remove the driver airbag module.
(Refer to "Restraint System - Driver Airbag Module (DAB) and Clock Spring")
Disconnect the steering wheel connector (A).

Loosen the bolt (A) and remove the steering wheel (B).
Tightening torque: 44.1–49 N·m

Install in the reverse order of removal.
Disassembly
Loosen the screws and remove the dynamic damper (A).

Loosen the screws (A) on the lower cover.

Loosen the screws (A), then disconnect the remote control switch (B).
Loosen the screws (C) on the front panel.

Disconnect the connectors (A) and remove the remote control switch (B).

Disconnect the steering wheel heater connector (A).

Remove the lower cover (A).

Loosen the screws and remove the front panel (A).

Installation is in the reverse order of removal.
Test yourself
A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.