Kia Forte BD Quiz
Body (Interior and Exterior)

Trunk Lid Assembly

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 32Engine Mechanical System — 47Engine Electrical System — 17Emission Control System — 10Engine Control System/Fuel System — 32Clutch System — 11Manual Transmission — 11DCT (Dual Clutch Transmission) System — 16Drive Shaft and Axle — 8Suspension System — 26Steering — 9Restraints — 11Brake System — 27Body (Interior and Exterior) — 119Body Electrical System — 98Heating, Ventilation, and Air Conditioning — 27
4steps
~24min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Components and Component Location

Component Location

1. Trunk Lid Assembly

Repair Procedures

Replacement

  1. Remove the trunk lid trim.

    (Refer to Trunk Lid - "Trunk Lid Trim")

  2. Disconnect the trunk lid connectors and wiring harness (A).

  3. After removing the bolts, remove the trunk lid assembly (B).

    Tightening torque: 8.8–11.8 N·m

  4. To install, reverse the removal procedure.

Test yourself

A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.