Engine Mechanical System
EGR Cooler Repair procedures
In this manual: Engine Mechanical System
9steps
~54min
2/5difficulty
Done 0 of 9
Removal and Installation
Disconnect the negative battery terminal.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
Drain the coolant.
(Refer to Cooling System - "Coolant")
Disconnect the EGR cooler coolant hose (A).

Disconnect the heater pump coolant hose (A).

Remove the exhaust manifold.
(Refer to Intake and Exhaust System - "Exhaust Manifold")
Remove the EGR cooler (A).
Tightening torque : 18.6 - 24 N·m

Install in the reverse order of removal.
Fill the coolant.
(Refer to Cooling System - "Coolant")
Was this page helpful?