Exhaust Manifold Repair procedures
Removal and Installation
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
Remove the air cleaner.
(Refer to Intake and Exhaust System - "Air Cleaner")
Disconnect the front oxygen sensor (A).

Remove the front muffler.
(Refer to Intake and Exhaust System - "Muffler")
Separate the water return & degas pipe (A).
Tightening torque : 18.6 - 24 N·m

Remove the exhaust manifold stay (A).
Tightening torque : 39.2 - 49 N·m

Remove the engine mounting support bracket.
Install the jack to the edge of the lower oil pan to support the engine.

Remove the engine mounting support bracket (A).
Tightening torque
Nut (B) :
88.3 - 108 N·m
Bolt (C) and nuts (D) :
58.8 - 74 N·m

Remove the heat protector (A).
Tightening torque : 9.8 - 11,8 N·m

Remove the EGR cooler pipe A (A).
Tightening torque : 34.3 - 39 N·m

Remove the exhaust manifold (A).
Tightening torque : 34.3 - 39 N·m

Remove the exhaust manifold gasket (A).

Install in the reverse order of removal.