Engine Mechanical System

Exhaust Heat Recovery System(EHRS) Repair procedures

8steps
~48min
2/5difficulty
010203040509.87N·mlb·ft
Tightening torque found on this page
Done 0 of 8

Removal and Installation

  1. Remove the engine room under cover.

    (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")

  2. Drain the engine coolant.

    (Refer to Cooling System - "Coolant")

  3. Remove the under cover (A).

    Tightening torque : 7.8 - 9,8 N·m

  4. Disconnect the exhaust heat recovery system (EHRS) coolant inlet and outlet hose (A).

  5. Remove the exhaust heat recovery system (EHRS) (A).

    Tightening torque : 39.2 - 58 N·m

  6. Disconnect the heater pipe hose (A) and heater hose (B).

  7. Remove the exhaust heat recovery system (EHRS) coolant pipe (A) from the sub frame.

    Tightening torque : 6.9 - 10,8 N·m

  8. Install in the reverse order of removal.