Body Electrical System

High Mounted Stop Lamp Repair procedures

8steps
~48min
2/5difficulty
Done 0 of 8

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the rear spoiler.

    (Refer to Body - "Rear Spoiler")

  3. Remove the high mounted stop lamp cover.

  4. Remove the high mounted stop lamp (A) after loosening the mounting screws.

Installation

  1. Install the high mounted stop lamp.

  2. Install the high mounted stop lamp cover.

  3. Install the rear spoiler.

  4. Connect the negative (-) battery terminal.