Body Electrical System
Room Lamp Repair procedures
In this manual: Body Electrical System
10steps
~60min
3/5difficulty
Done 0 of 10
Removal
Disconnect the negative (-) battery terminal.
Using a screwdriver or remover, separate the room lamp lens (A) from the room lamp.

Remove the room lamp (A) after loosening the screws.

Remove the room lamp assembly (B) after disconnecting the room lamp connector (A).

Bulb Replacement
Using a screwdriver or remover, separate the room lamp lens (A) from the room lamp.

Disconnect the room lamp bulb (A).

Installation
Connect the room lamp connector.
Install the room lamp.
Install the room lamp lens.
Connect the negative (-) battery terminal.
Was this page helpful?