Body Electrical System
Turn Signal Lamp Repair procedures
In this manual: Body Electrical System
12steps
~72min
3/5difficulty
Done 0 of 12
Removal
Door Mirror Turn Signal Lamp
Disconnect the negative (-) battery terminal.
Remove the mirror (A) from the mirror holder.

Disconnect the heating connectors (A) and BSD indicator connector (B) from the mirror.

Remove the door mirror housing (A) after loosening the mounting screws.

Remove the door mirror cover (A) after separating the mounting clips.

Remove the door mirror turn signal lamp (A) after loosening the screw.

Disconnect the connector (A) from the door mirror turn signal lamp (B).

Installation
Install the door mirror turn signal lamp.
Install the door mirror cover.
Install the door mirror housing.
Install the door mirror.
Connect the negative (-) battery terminal.
Was this page helpful?