Body Electrical System
Vanity Lamp Repair procedures
In this manual: Body Electrical System
8steps
~48min
2/5difficulty
Done 0 of 8
Removal
Disconnect the negative (-) battery terminal.
Detach the vanity lamp (A) using a flat-tip screwdriver.

Disconnect the vanity lamp connector (A).

Bulb Replacement
Detach the vanity lamp (A) using a flat-tip screwdriver.

Remove the vanity lamp bulb (A).

Installation
Connect the vanity lamp connector.
Install the vanity lamp.
Connect the negative (-) battery terminal.
Was this page helpful?