Kia Optima Hybrid Owner's Manual Quiz
Body Electrical System

Front Fog Lamp Repair Procedures

In this manual: Body Electrical System
General Information — 4Engine Mechanical System — 50Engine Electrical System — 20Emission Control System — 30Engine Control System/Fuel System — 84Automatic Transmission — 98Drive Shaft and Axle — 15Suspension System — 36Steering — 12Restraints — 50Brake System — 38Body (Interior and Exterior) — 54Body Electrical System — 233Heating, Ventilation, and Air Conditioning — 57
10steps
~60min
3/5difficulty
Done 0 of 10

Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the lighting switch from the multifunction switch. (Refer to Multifunction Switch)
  3. Using the front fog lamp switch, check for continuity between the terminals shown below. If continuity is not as specified, replace the multifunction switch.
    Front Fog Lamp

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front wheel guard clips (2EA). (Refer to Group BD - "Front Bumper")
  3. Disconnect the front fog lamp connector (A).
  4. Replace the front fog lamp (A) by turning it counterclockwise.

Installation

  1. Install the front fog lamp.
  2. Connect the lamp connector.
  3. Install the front bumper.

Test yourself

A quick Kia Optima Hybrid Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.