Body Electrical System
Rheostat Repair Procedures
In this manual: Body Electrical System
5steps
~30min
2/5difficulty
Done 0 of 5
Inspection
- Disconnect the negative (-) battery terminal.
- Remove the lower crash pad panel. (Refer to Group BD - "Crash Pad")
- Remove the side hazard switch assembly (A), as shown in the illustration below.
Wear gloves to protect your hands.
- Disconnect the rheostat connector (A) from the lower hazard switch.
- Turn on the rheostat switch and check continuity between the terminals.
Test yourself
A quick Kia Optima Hybrid Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?