Rear Combination Lamp Repair Procedures

Removal

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the rear combination lamp cover (A).

   

3. 3
   Replace the turn signal lamps (A) by turning them counterclockwise.

   

4. 4
   Disconnect the connector (A) and loosen the mounting nuts.

   

5. 5
   Remove the rear combination lamp (A) by disconnecting the connector (B).

   

6. 6
   Disconnect the negative (-) battery terminal.
7. 7
   Remove the luggage compartment trim. (Refer to Group BD - "Luggage Compartment")
8. 8
   If only the back-up lamp bulb needs to be replaced without removing the rear combination lamp assembly, replace the back-up lamp bulb (A) after removing the luggage compartment trim.

   

   The back-up lamp bulb is removed after removing the rear combination lamp assembly.

9. 9
   Remove the rear combination lamp assembly by removing the nuts and disconnecting the connector (A).

   

   

10. 10
    Replace the back-up lamp bulbs (A) by turning the sockets (B) counterclockwise.

    

Installation

1. 1
   Install the rear combination lamp assembly (inside).
2. 2
   Install the rear combination lamp assembly (outside).