Kia Optima Hybrid Owner's Manual Quiz
Body Electrical System

Turn Signal Lamp Repair Procedures

In this manual: Body Electrical System
General Information — 4Engine Mechanical System — 50Engine Electrical System — 20Emission Control System — 30Engine Control System/Fuel System — 84Automatic Transmission — 98Drive Shaft and Axle — 15Suspension System — 36Steering — 12Restraints — 50Brake System — 38Body (Interior and Exterior) — 54Body Electrical System — 233Heating, Ventilation, and Air Conditioning — 57
11steps
~66min
3/5difficulty
Done 0 of 11

Removal

Outside Mirror Turn Signal Lamp
  1. Disconnect the negative (-) battery terminal.
  2. Remove the mirror (C) after disconnecting the heater connector (A) and the BSD warning connector (B).
  3. Remove the outside rearview mirror housing (A) after loosening the mounting screw.
    Be careful not to damage the mirror holder locking clip.
  4. Remove the outside rearview mirror cover (A) after removing the locking clip.
    Be careful not to damage the mirror cover catch.
  5. Loosen the retaining screw (A).
  6. Remove the outside mirror turn signal lamp (B) after disconnecting the connector (A).

Installation

Side Repeater Lamp
  1. Install the lamp into the side repeater lamp assembly.
  2. Install the side repeater lamp.
  3. Install the outside mirror turn signal lamp onto the outside mirror.
  4. Install the outside mirror.
  5. Connect the battery negative (-) terminal.
Outside Mirror Turn Signal Lamp

Test yourself

A quick Kia Optima Hybrid Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.