Body Electrical System
Charge Information Lamp Repair Procedures
In this manual: Body Electrical System
8steps
~48min
2/5difficulty
Done 0 of 8
Removal
- Disconnect the negative (-) battery terminal.
- Using a flat-tip screwdriver or a remover, remove the airbag center vent panel (A).
- Disconnect the hazard switch connector (A).
- Remove the upper center panel (A) after loosening the mounting screws.
- Disconnect the charge information lamp connector (A).
- Remove the charge information lamp assembly (A) after loosening the mounting screws.
Installation
- Install the charge information lamp assembly, the center panel upper cover, and the airbag center vent panel.
- Connect the negative (-) battery terminal.
Test yourself
A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?