Body Electrical System

Room Lamp Repair Procedures

12steps
~72min
3/5difficulty
Done 0 of 12

Inspection

  1. Make sure the switch operates correctly after connecting the room lamp connector (A). Room lamp

Removal

Map lamp
  1. Disconnect the negative (-) battery terminal.
  2. Separate the lamp lens (A) from the room lamp using a flat-tip screwdriver.
  3. Separate the room lamp (A) from the headliner after loosening the screws (2EA).
  4. Remove the room lamp (B) after disconnecting the connector (A).
  5. If the bulb needs to be replaced, replace the bulb (A) after removing the lamp lens.
  6. Disconnect the negative (-) battery terminal.
  7. Remove the vanity lamp assembly (A).
  8. Remove the lamp assembly (B) after disconnecting the connector (A).
  9. If the bulb needs to be replaced, replace the bulb (A).
Vanity lamp

Installation

Map lamp
  1. Install the interior lamp unit after connecting the lamp connector.
  2. Install the lens after assembling the lamp.
  3. Install the vanity lamp assembly after connecting the lamp connector.
Vanity lamp

Test yourself

A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.