Body Electrical System
Overhead Console Lamp Repair Procedures
In this manual: Body Electrical System
6steps
~36min
2/5difficulty
Done 0 of 6
Inspection
- Remove the overhead console lamp assembly, then check continuity between the terminals. If continuity is not as specified, replace the map lamp switch.
No. Description 1 Ground (-) 2 Door (-) 3 Room/Door (-) 4 Battery (+)
Removal
- Disconnect the negative (-) battery terminal.
- Remove the mounting screws (2EA) and remove the overhead console (A).
- Remove the overhead console after disconnecting the connectors (A).
- If the bulb needs to be replaced, replace the bulb (in the following order).
- Remove the overhead console lens (A).
- Remove the bulb (A).
- Remove the overhead console lens (A).
Installation
- Install the overhead console lamp after connecting the connector.
- Install the lens by tightening the 2 screws.
Test yourself
A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?