Kia Soul EV Owner's Manual Quiz
Body Electrical System

Hazard Warning Switch Repair Procedures

In this manual: Body Electrical System
General Information — 17Maintenance — 17Drive Shaft and Axle — 15Suspension System — 36Steering — 24Restraints — 48Brake System — 37Body (Interior and Exterior) — 207Body Electrical System — 203Heating, Ventilation, and Air Conditioning — 80Electric Vehicle Battery System — 115
10steps
~60min
3/5difficulty
Done 0 of 10

Inspection

  1. The SJB can be diagnosed using GDS. The SJB communicates with GDS, which then displays the input and output data along with the codes. It can quickly diagnose hazard lamp switch defects with GDS. GDS can forcibly control the actuator, monitor input/output values and perform self-diagnosis.
  2. To diagnose the SJB function, select the vehicle model, BCM and SJB.
  3. To view the current SJB input/output values, select "Current DATA" to view the current SJB input/output information and conditions.

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the center vent assembly (A).
  3. Disconnect the connector (A) from the center vent assembly.
  4. Remove the hazard switch (A) from the center vent assembly.

Installation

  1. Install the hazard switch into the center vent assembly.
  2. Connect the connector and install the center duct assembly.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.