Kia Stinger CK Quiz
Body (Interior and Exterior)

Floor Console Assembly

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
15steps
~90min
4/5difficulty
Done 0 of 15

Components and Component Location

Component Location

1. Floor Console Assembly

Repair Procedures

Replacement

  1. Disconnect the heater control unit (A).

  2. Remove the heater control unit by disconnecting the connector (A).

  3. Remove the console upper cover (A) using a remover.

  4. Remove the console upper cover (A) after disconnecting the console cover connectors.

  5. Remove the small console storage box tray (A).

  6. Remove the console storage box mat (A).

  7. Remove the console side molding (A).

  8. Disconnect the console upper extension connectors (A).

  9. Disconnect the electronic shift lever connector (A).

  10. Disconnect the console lower extension connectors (A).

  11. Remove the console front cover (A) after loosening the mounting screws.

  12. Remove the console tray (A).

  13. Remove the electronic shift lever (A) after loosening the mounting bolts and screws.

  14. Remove the console assembly (A) after loosening the mounting bolts.

  15. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.