Kia Cee'd Quiz
Fuel System

Fuel Level Sensor Assembly Repair Procedures

In this manual: Fuel System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
7steps
~42min
2/5difficulty
Done 0 of 7

Removal

  1. Remove the fuel pump. (Refer to Fuel System - "Fuel Pump")
  2. Disconnect the pump and sender connector (A).
  3. Remove the fuel feed hose (A) from the fuel filter after releasing the retaining clip (B).
  4. Remove the plate assembly (C) after removing the damper pipe bracket hooks (D).
  5. Disconnect the pump wiring connector (A) from the pump.
  6. Remove the reservoir cup (B) after releasing the retaining hooks (C).
  7. Remove the fuel level sensor (A) by sliding it downward after releasing the lock (B).

Installation

  1. Installation is the reverse of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.