Kia Cee'd Quiz
Fuel System

Delivery Pipe Repair Procedures

In this manual: Fuel System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
7steps
~42min
5/5difficulty
0102030405023.517N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Removal

  1. Turn the ignition OFF and disconnect the negative (-) battery cable.
  2. Relieve the residual fuel pressure from the fuel line. (Refer to Fuel System - "Relieving Fuel Pressure in the Fuel Line")
  3. Remove the intake manifold. (Refer to Engine Mechanical System - "Intake Manifold")
  4. Disconnect the injector connectors (A) and the rail pressure sensor connector (B).
  5. Remove the high-pressure fuel pipe (C).
  6. Remove the engine oil pressure sensor.
  7. Remove the mounting bolt (D), then remove the delivery pipe and injector assembly from the engine.

Installation

  1. Installation is the reverse of removal. Delivery pipe bolt: 18.6 ~ 24 N·m High-pressure fuel pipe nut: 26.5 ~ 32 N·m

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.