Headlight Aiming

Without AFLS

1. Inflate the tires to the specified pressure and remove any loads from the vehicle except the driver, spare tire, and tools.

2. The vehicle must be parked on a level floor.

3. Draw vertical lines (vertical lines passing through the respective centers of the headlights) and a horizontal line (horizontal line passing through the center of the headlight) on the screen.

4. With the headlight and battery in normal condition, aim the headlights so that the brightest part falls on the horizontal and vertical lines.

5. To aim the low beam left or right, turn the adjuster (1) clockwise or counterclockwise. To aim the low beam up or down, turn the screwdriver (2) clockwise or counterclockwise.

To aim the high beam up or down, turn the adjuster (3) clockwise or counterclockwise.

With AFLS

1. Turn the engine OFF.

2. Turn the light switch to the low beam position.

3. Set the steering wheel so the front wheels face straight ahead.

4. Start the engine.

5. Inflate the tires to the specified pressure and remove any loads from the vehicle except the driver, spare tire, and tools.

6. The vehicle must be parked on a level floor.

7. Draw vertical lines (vertical lines passing through the respective centers of the headlights) and a horizontal line (horizontal line passing through the center of the headlight) on the screen.

8. With the headlight and battery in normal condition, aim the headlights so that the brightest part falls on the horizontal and vertical lines.

9. To aim the low beam left or right, turn the adjuster (1) clockwise or counterclockwise. To aim the low beam up or down, turn the screwdriver (2) clockwise or counterclockwise. To aim the high beam up or down, turn the driver (3) clockwise or counterclockwise.