Engine Control System/Fuel System

Fuel filter

13steps
~78min
3/5difficulty
Done 0 of 13

Components and Component Location

Component

1. Plate Assembly
2. Clip
3. O-Ring
4. Bracket
5. Reservoir Cup
6. Fuel Pump Filter
7. Fuel Pump and Tube Assembly
8. O-Ring
9. Spacer
10. Auxiliary Pump
11. Clamp
12. Fuel Pressure Regulator
13. Fuel Filter
14. Wiring

Repair Procedures

Removal

  1. Remove the fuel pump module.

    (Refer to Fuel System - Fuel Pump Module)

  2. Disconnect the fuel pump motor connector (A) and the fuel level sensor connector (B).

  3. Remove the fuel feed tube quick connector (B) after removing the clamp (A).

  4. Remove the plug (A) from the plate pipe.

  5. Remove the head assembly (A) and the O-ring (B).

  6. Remove the reservoir cup (A) after releasing the locking hooks.

  7. Remove the pump filter (A) after releasing the locking hooks.

  8. Remove the wiring from the fuel filter after disconnecting the fuel pump connector (A) and the ground (B).

  9. Remove the fuel pressure regulator (B) after removing the retaining bracket (A).

  10. Disconnect the fuel pump hose (A) after releasing the clamp.

  11. Remove the auxiliary pump (A) by releasing the locking hook.

  12. Remove the O-ring (B) and the gasket (C) after removing the fuel pump and tube assembly (A).

  13. Remove the bracket (A) from the fuel filter.

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.