Engine Control System/Fuel System

Fuel Pressure Regulator

7steps
~42min
2/5difficulty
Done 0 of 7

Components and Component Location

Component

1. Plate Assembly
2. Clip
3. O-Ring
4. Reservoir Cup
5. Clip
6. Fuel Pressure Regulator
7. Fuel Filter

Repair Procedures

Removal

  1. Remove the fuel pump module.

    (Refer to Fuel System - Fuel Pump Module)

  2. Disconnect the fuel pump motor connector (A) and the fuel level sensor connector (B).

  3. Remove the fuel feed tube quick connector (B) after removing the clamp (A).

  4. Remove the plug (A) from the plate pipe.

  5. Remove the head assembly (A) and the O-ring (B).

  6. Remove the reservoir cup (A) after releasing the locking hooks.

  7. Remove the fuel pressure regulator (B) after removing the retaining bracket (A).

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.