Fan

Components and Component Location

Components

1. Cooling Fan 3. Cooling Fan Motor

3. Cooling fan shroud

Specifications

Specifications

Item	Specification
Fan Type	Puller
Blower Speed Control	ON/OFF
Air Flow [m³/h]	1570 - 8% min.
Fan Speed (rpm)	1960 ± 8%
Current (A)	10.0 + 10% max.

Description and Operation

Description

[A/C Type] The cooling fan operates in 2 steps (HIGH/LOW). The Engine Control Module (ECM) controls the cooling fan based on coolant temperature, vehicle speed, and A/C operation. [Non-A/C Type] The cooling fan operates in 1 step (HIGH). The Engine Control Module (ECM) controls the cooling fan based on coolant temperature, vehicle speed, and A/C operation.

Circuit Diagrams

Wiring Diagram

Repair Procedures

Removal and Installation

1. 1
   Remove the radiator. (Refer to Cooling System - "Radiator")
2. 2
   Remove the cooling fan assembly (A) from the radiator.

   Tightening torque: 4.9–7.9 N·m

   

3. 3
   Install in the reverse order of removal.

Disassembly

1. 1
   Remove the cooling fan (A) from the cooling fan assembly.

   

2. 2
   Remove the fan motor (A) from the cooling fan shroud. Torque: 3.9–5.9 N·m N·m (0.4–0.6 kgf·m, 2.9–4.3 ft-lbf, 34.7–52.1 in-lbf)

   

   

3. 3
   Installation is in the reverse order of removal.

Inspection

Blower motor

1. 1
   Disconnect the fan motor connector.
2. 2
   Connect battery voltage to the "+" terminal and ground to the "-" terminal.
3. 3
   Check that the cooling fan motor operates properly.