Kia Picanto JA Quiz
Body (Interior and Exterior)

Rear Seat Assembly

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 30Engine Mechanical System — 46Engine Electrical System — 14Emission Control System — 11Engine Control System/Fuel System — 46Clutch System — 12Manual Transmission — 10Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 17Brake System — 22Body (Interior and Exterior) — 104Body Electrical System — 80Heating, Ventilation, and Air Conditioning — 17
4steps
~24min
2/5difficulty
0102030405025.519N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Components and Component Location

Component Location

1. Rear Seat Cushion Assembly 2. Rear Seat Back Assembly

Repair Procedures

Replacement

  1. Remove the rear seat cushion assembly (A).
  2. Disconnect the rear center seat belt (A).
  3. Remove the rear seatback (A) after loosening the mounting bolt.

    Tightening torque: 16.7–26 N·m

  4. Install in the reverse order of removal.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.