Kia Picanto JA Quiz
Body (Interior and Exterior)

Rear Seat Belt Buckle

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 30Engine Mechanical System — 46Engine Electrical System — 14Emission Control System — 11Engine Control System/Fuel System — 46Clutch System — 12Manual Transmission — 10Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 17Brake System — 22Body (Interior and Exterior) — 104Body Electrical System — 80Heating, Ventilation, and Air Conditioning — 17
3steps
~18min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Components and Component Location

Component Location

1. Rear Seat Belt Buckle [RH] 2. Rear Seat Belt Buckle [LH]

Repair Procedures

Replacement

  1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")
  2. Remove the rear seat belt buckle (A) after loosening the mounting bolt.

    Torque: 39.2 – 54 N·m

    [LH]
    [RH]
  3. Install in the reverse order of removal.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.