Kia Picanto JA Quiz
Body (Interior and Exterior)

Trunk Latch

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 30Engine Mechanical System — 46Engine Electrical System — 14Emission Control System — 11Engine Control System/Fuel System — 46Clutch System — 12Manual Transmission — 10Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 17Brake System — 22Body (Interior and Exterior) — 104Body Electrical System — 80Heating, Ventilation, and Air Conditioning — 17
4steps
~24min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Components and Component Location

Component Location

1. Tailgate Lock Assembly


Repair Procedures

Replacement

  1. Remove the liftgate trim. (Refer to Liftgate - "Liftgate Trim".)
  2. Disconnect the rear door lock connector (A).
  3. Remove the rear door lock (B) after loosening the mounting bolts (A).

    Tightening torque: 10.8–11.8 N·m N·m

  4. Install in the reverse order of removal.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.