Kia Rio YB Quiz
Body (Interior and Exterior)

Hood Top Cover

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 31Engine Mechanical System — 44Engine Electrical System — 14Emission Control System — 9Engine Control System/Fuel System — 30Clutch System — 10Manual Transmission — 10Automatic Transmission — 23Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 14Brake System — 22Body (Interior and Exterior) — 115Body Electrical System — 84Heating, Ventilation, and Air Conditioning — 28
4steps
~24min
2/5difficulty
0102030405026.520N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Components and Component Location

Component Location

1. Hood Top Cover

Repair Procedures

Replacement

  1. Remove the cap (A) and nuts, then remove the wiper arm (B).

    Tightening torque: 22.6–26 N·m

  2. Disconnect the washer hose (A).

  3. Disconnect the clips, then remove the upper shroud cover (A).

  4. Install in the reverse order of removal.

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.