Kia Rio YB Quiz
Engine Mechanical System

Exhaust Manifold

In this manual: Engine Mechanical System
General Information — 8Maintenance — 31Engine Mechanical System — 44Engine Electrical System — 14Emission Control System — 9Engine Control System/Fuel System — 30Clutch System — 10Manual Transmission — 10Automatic Transmission — 23Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 14Brake System — 22Body (Interior and Exterior) — 115Body Electrical System — 84Heating, Ventilation, and Air Conditioning — 28
8steps
~48min
2/5difficulty
0204060801004936N·mlb·ft
Tightening torque found on this page
Done 0 of 8

Components and Component Location

Components

1. Exhaust Manifold Gasket
2. Exhaust Manifold		 3. Exhaust Manifold Bracket
4. Heat Protector

Repair Procedures

Removal and Installation

  1. Disconnect the negative battery cable.

  2. Disconnect the oxygen sensor connector (A).

  3. Remove the front muffler.

    (See Intake and Exhaust System - Muffler)

  4. Remove the exhaust manifold support (A).

    Torque: 39.2 – 49 N·m

  5. Remove the heat shield (A).

    Tightening torque: 8.8–10.8 N·m

  6. Remove the exhaust manifold (A).

    Tightening torque: 29.4–34 N·m

  7. Remove the exhaust manifold gasket (A).

  8. Install in the reverse order of removal.

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.