Rear Turn Signal Light Bulb Replacement (4-Door)

1. Open the trunk lid.

2. Remove the service cover by pulling it out.

3. Remove the socket from the assembly by turning the socket counterclockwise until the protrusions on the socket align with the slots in the assembly.

4. Remove the bulb from the socket by pressing it in and turning it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.

5. Insert a new bulb by pushing it into the socket and turning it until it locks into place.

6. Install the socket into the assembly by aligning the tabs on the socket with the grooves in the assembly. Insert the socket into the assembly and turn the socket clockwise.

7. Install the service cover.