Tire (Pressure and Tread Wear)

Repair Procedures

Inspection

1. Check the tire pressure.

   15 in: 230 kPa (33 psi)

   16 in: 230 kPa (33 psi)

   17 in: 230 kPa (33 psi)

Tire Rotation

Pull and Wander Test

If the steering pulls to one side, rotate the tires according to the following wheel rotation order.

1. 1

   Swap the front right and front left tires, then perform a road test to confirm vehicle stability.

   

2. 2

   If the steering pulls in the opposite direction, rotate the front and rear tires, then perform the road test again.

   

3. 3

   If the steering continues to pull to the same side, rotate the front right tire and perform the road test again.

   

4. 4

   If the steering continues to pull to one side, replace the front wheels with new ones.

   

Tire Wear

1. 1

   Measure the tire tread depth.

   Tread depth [limit]: 1.6 mm (0.0630 in.)

2. 2

   If the remaining tread depth (A) is less than the limit, replace the tire.