Mode Selection

The mode selection button controls the direction of airflow through the ventilation system.

The airflow outlet is changed as follows:

Refer to the illustration in the "Manual Climate Control System" section on page 4-112.

Floor and Defrost (A, C, D, E, F)

Most of the airflow is directed to the floor and windshield, with a small amount directed to the side window defroster vents.

Face level (B, D, F)

Airflow is directed to the upper body and face. In addition, each vent can be adjusted to direct the air flowing out of the outlet.

Bi-level (B, D, C, E, F)

Airflow is directed to the face and floor.

Floor Level (C, A, D, E, F)

Most of the airflow is directed to the floor, with a small amount directed to the windshield and side window defroster vents.

Defrost Mode

When the defrost mode is selected, the following system settings are automatically performed:

• The air conditioning system will be turned on.
• The outside (fresh) air position will be selected.
• The fan speed will be set to high.

To turn off the defrost mode, press the mode button, the defrost button, or the AUTO button again.

Instrument Panel Vents

The air vent can be opened or closed separately using the horizontal adjustment ring. To close the vent, turn it downward to the maximum position. To open the vent, turn it upward to the desired position.

In addition, you can adjust the direction of the air flowing from these vents using the vent control lever, as shown in the illustration.