Safety Notes for Using the Tire Mobility Kit

• Park your vehicle on the side of the road so that you can work with the TMK away from moving traffic. Place the warning triangle in a visible location to alert approaching vehicles to your location.
• To make sure your vehicle does not move, even when parked on fairly level ground, always apply the parking brake.
• Use the TMK only to seal and inflate passenger car tires. Do not use it on motorcycles, bicycles, or any other type of tire.
• Do not remove any foreign objects, such as nails or screws, that have punctured the tire.
• Before using the TMK, read the safety precautions printed on the sealant bottle.
• If the vehicle is outdoors, keep the engine running. Otherwise, the compressor may eventually discharge the vehicle battery.
• Never leave the TMK unattended while it is operating.
• Do not operate the compressor for more than 10 minutes at a time, or it may overheat.
• Do not use the TMK if the ambient temperature is below -30 °C (-22 °F).
• If the tire and wheel are damaged, do not use the Tire Mobility Kit for your safety.

Technical Data

System voltage: 12 V DC

Operating voltage: 10–15 V DC

Rated current: 15 A max.

Suitable for use at temperatures: -40 ~ +70 °C

Maximum operating pressure: 6.2 bar (90 psi)

Compressor size: 140 x 150 x 60 mm (5.5 x 5.9 x 2.4 in.)

Sealant bottle: 104 x ø 85.5 mm (4.1 x 3.4 in.)

Compressor weight: 795 g (1.75 lb)

Sealant volume: 300 ml (18.3 cu in)

❈ Sealant and replacement parts can be purchased and replaced at an authorized Kia dealer or tire dealer. Empty sealant bottles can be disposed of at home. Residual liquid sealant must be disposed of by your Kia dealer or tire dealer, or in accordance with local waste disposal regulations.