Operating the Door Locks from the Outside of the Vehicle

To remove the cover:

1. Pull the door handle.

2. Press the lever (1) located inside the lower part of the cover with the key or a flat-blade screwdriver.

3. Push out the cover (2) while pressing the lever.

• Turn the key toward the rear of the vehicle to lock, and toward the front of the vehicle to unlock.
• If you unlock (A) or lock (B) the driver's door with the key, all doors of the vehicle will lock/unlock automatically.
• The doors can also be locked and unlocked using the transmitter.
• When the doors are unlocked, they can be opened by pulling the door handle.
• When closing a door, push it by hand. Make sure the doors are securely closed.

CAUTION

Be careful not to damage the cover when removing it, and do not lose it after removal.

NOTICE

• In cold and humid climates, the door lock and door mechanisms may not operate properly due to freezing conditions.
• If the doors are locked/unlocked repeatedly in succession with either the vehicle key or the door lock switch, the system may temporarily stop operating to protect the circuit and prevent damage to system components.

WARNING

• If the door is not closed securely, it may open again.
• Be careful not to get your body or hands caught when closing the door.

WARNING

If people must remain in the vehicle for longer periods when it is very hot or cold outside, there is a risk of injury or danger to life. Do not lock the vehicle from outside when people are inside.

CAUTION

Do not open and close the doors too frequently, and do not apply excessive force to the door while the door closer is operating.